Passeclair | Mavifood | Maviroll | Mavifold | Mavicold | Maviswing |
|
MAVISWING High-Impact Swing-Door |
|
|
Developed for a Wide Variety of Users, the Hangar Maviswing impact double swing door is made from materials complying with the standards relating to health and safety of equipment, for food processing and meat industries, pharmaceutical plants, laboratories, hospitals, public buildings, abattoirs, dairies, supermarkets etc.
Characteristics:
Smooth and seamless, washable and waterproof High Density Polyethylene: all the features you are looking for.
Hangar demands quality materials for the Hangar Maviswing doors. We have chosen for High Density Polyethylene 500 (HDPE) - a material recognised in the food and meat industries for it's resilience, density and great strength - the best for your swing door panels.
The Hangar Maviswing impact single or double swing doors are durable and attractive. HDPE 500 is unaffected by extreme low temperatures.
The Hangar Maviswing doors are particularly suited to the requirements of dairies, food factories, etc.
They withstand chemical disinfectants and are easily washed down or steam cleaned.
Mechanical and Chemical Durability
Unique HDPE 500 Panel Construction:
The 15 mm thick panels are of a monolithic moulded construction.
The lateral spine reinforcements - 40 mm thick - are polyfused with the panels into a one piece construction.
The seal strength of the Hangar Maviswing door lies in our exclusive back-edge pund and spine assembly by polyfusion process, giving rigid strength to withstand knocks without sagging or denting. The result is a non-porous smooth surface and a seamless finish. The panel will not absorb moisture and makes the door easy to be cleaned. The panel remains a good fit once installed.
Quality choice of door frames. The frame can be made either of a 4 mm thick reinforced rigid plastic profile or alternatively of a heavy duty "U" shaped 1.5 mm thick AISI 304 stainless steel profile.
Standard features incorporate silicon sealing gaskets on three sides for additional sanitary safety.
Vision Panels
Oblong windows 300 x 600 mm
Portholes ø 350 mm
Vision panels, 15 mm thick, are smooth and seamless, avoiding bacterial growth and are easily washable.
Option: Variety of vision panels.
Options for Heavy Traffic
Lower protections can be easily added on both faces of each door panel
Teardrop bumpers: Coloured polyethylene teardrop bumpers: a specially designed arch protecting the panel surface - standard RAL colours available or AISI 304 stainless steel bumpers.
Flush kick plates of high impact polyethylene or AISI 304 stainless steel.
Bumper strips
Installation and Clearance
Fitting doors onto masonry within the clear bay opening available - as shown below. Fitting doors onto insulating panels 60-80-90-100 mm thick with a reinforced rigid plastic frame - 4 mm thick or alternatively with a complete frame in AISI 304 stainless steel - 1.5 mm thick.
Patented Polyethylene
hinges Exclusive double acting hinges, moulded in Food grade - HDPE 500 material with stainless steel spring - No lubrication required. No water retention areas, will not absorb moisture or harbouring bacteria, they do not swell, rot, warp or rust. Available in RAL colours to match your panel colour. Self closing or with 90° "stay open" device Option: Stainless steel hinges Unbreakable (unlike ABS hinges) |
Panel Configurations options
All doors are made to measure.
Almost any size is possible.
Heavy Traffic Design |
Monorail Passage |
Raised Floor Passage |
Economy Model |
Wall Protection Strips
Ideal for protecting wall panels, corridors. Withstands heavy-duty impacts, durable and non-corrosive, washable.
The bevelled profile at the top and bottom of the strip prevents water retention and moisture.
To be fitted with screws, covered by screw head strip in various colours.
Supplied in the standard colour range.
Standard dimensions:
Length: 2000 mm
Height: 90 -120 -200 mm
Thickness: 15 mm
Plinths or Wall Skirts
Ideal for protecting the bottom of walls
The profile is bevelled at the top to prevent water retention and moisture, and grooved at the bottom to fix a triangular profile (without screw), for fitting the plinths to finished floors.
The plinth is fitted onto the wall with screws and covered by screw head strips in various colours.
Supplied in he standard colour range.
Standard dimensions:
Length: 2000 mm
Height: 90 -120 -200 mm
Thickness: 15 mm
Corner protections - Angled wall protections
Protects the corners of wall panels and masonry.
Strip delivered flat 2000 mm
Standard dimensions
Width: 90 -120 -200 mm
Thickness: 15 mm
Option: | Preformed polyfused 90° angle |
Width: 200 mm |
Colour options for Door
and Building Protection
White | Red | Yellow | Green |
RAL 3000 | RAL 1016 | RAL 6024 | |
Blue | Orange | Pink | Grey |
RAL 5017 | RAL 2009 | RAL 4003 | RAL 7037 |
Bay clear opening
Clear door opening (free passage) is Clear bay opening less 2 x A |
Bay clear opening
Clear door opening (free passage) is Clear bay opening less A |
SPACE REQUIREMENTS |
||
A (in mm) | 1 leaf | 2 leaf |
Masonry | 73 | 146 |
Stainless steel frame | 76 | 149 |
Rigid plastic frame | 80 | 152 |